|
Maximum working pressure |
350bar |
|
Maximum flow rate |
1-20L/min (optional) |
|
Pilot ratio |
4.1:1 & 8.5:1 |
|
Balance valve relieving setting pressure |
Adjustable pressure range: 100～350bar Factory setting pressure: 260bar(optional) |
|
Increasing Pressure |
155bar/turn |
|
Oil port |
V1, V2 are G3/8, M port is G1/4, C1 port is φ8.5; the diameter of the hole at the end face of the cylinder connected with C2 port is ≤φ6. |
|
Working oil temperature |
-20℃～+90℃, if there is a lower temperature requirement, please contact with YUZHOU technology. |
|
Working fluid |
mineral oil (HL, HLP) according to DIN51 524 standard |
|
Fluid viscosity range |
10～380mm2/s |
|
The max allowable pollution degree of oil |
level 9 according to NAS1638 |
|
Recommended filter filtration precision |
minimum β10≥75 |
If you have lower temperature requirements, please contact YUZHOU engineer;
